Sign In | Join Free | My himfr.com
Home > Gear Oil Transfer Pump >

Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump

    Buy cheap Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump from wholesalers
     
    Buy cheap Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump from wholesalers
    • Buy cheap Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump from wholesalers
    • Buy cheap Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump from wholesalers
    • Buy cheap Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump from wholesalers

    Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump

    Ask Lasest Price
    Brand Name : Yuzhou
    Model Number : CBN
    Certification : ISO/SGS/CE
    Price : Negotiable
    Payment Terms : T/T, Western Union
    Supply Ability : 500 sets per month
    Delivery Time : 2-5 working days
    • Product Details
    • Company Profile

    Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump

    CBN series heavy oil pump gear oil transfer pump electric motor connection 380v 220v 415v

    1.Introduction
    CBN series heavy oil pump composes of pump body, cover ,gear, and shaft-end seal parts and so on. Using transmission of bridge type exterior pulley and direct connection of motors with low speed and noise, high suction characters. On the other hand, sealing using 2 types mechanical sealing structures due to the transfer liquids.
    The series can all adopt stainless anti-acid and anti-corrosion material to make, suitable for food industry,pharmacy and daily chemical industry.
    Proper medium temperature:below 230C
    Proper medium viscosity:below 2000mm2/S
    2.Transfer medium
    1).Paint,rosin,paraffin wax,soap,sludge,asphalt,high viscosity oil, etc.
    2).Butter,syrup,sauce,grease,toothpaste,etc.

    ModelCBN heavy oil pump
    Flow rate1- 60cbm/h
    Output pressure4-25 Bar
    Pump materialCast iron/ stainless steel
    Efficiency80%
    Frequency&voltageCustomized from the customer power supply
    Application scope

    Transport various lubrication liquid at temperature not higher than 70 ℃. If temperature is up to 200 ℃,anti-high temperature material will be matched.Its viscosity is 5*10-5-15*10-3m2/s.
    Such as : Alcohol.gasoline, Aqueous Ammonia, Isopropyl ether, Petoleum products and so on.


    Technical data:

    Model


    Caliber

    (mm)


    Flow

    Pressure

    (MPa)


    Speed ( r/min)

    Power (KW)


    m3/hL/min
    CBN-4324660.759601.5
    CBN-74071160.759603
    CBN-1350132160.759605.5
    CBN-1870183000.69607.5
    CBN-3080305000.696011
    CBN-38100386330.696015
    CBN-45100457500.696018.5
    CBN-601006010000.496022


    Troubles and Solutions

    Troubles

    Productive

    Reason


    Solutions

    Discharging oil or discharging little oil

    1.Revolving direction reversed
    2.Valve closed
    3.Oil absorption tube has not been soaked into the oil
    4.The high of absorption exceeds the rated
    5.The filtering area of the filter at absorption end is too small
    6.Air leakage in absorption tube
    7.Safety valve blocked or doesn’t work well
    8. Lower temperature of oil results in viscosity increasing

    1.Change in to right direction 2.Open valve
    3.Check out oil absorption tube and soak it in the liquid 4.Measure absorption pressure and raise the oil level 5.Change filter and extend the filtering area6.Check every joint and seal them with sealing material 7.Disassemble and wash safety valve and polish with abrasive grease 8. Heat liquid or reduce exhausting pressure or the volume of oil exhaustion

    No pressure or pressure not rising1.The button of the pressure meter is still in OFF position 2.The pressure of the safety valve is too low3.Side tube valve is on 4.High temperature,low viscosity o foil and small resistance of the tube 5.Air leakage in the tube1.Press the button ON of the pressure meter2.Readjust the safety valve pressure 3.Close the side tube valve 4.Reduce oil temperature 5. Check out absorption tube
    Oil leakage in mechanical seal1.Shaft seal has not been adjusted properly 2.O-seal ring wear 3.The defects caused by wearing of stationary and rotating rings of mechanical seal4.Spring flabby1.Adjust it 2.Change O-seal 3.Change stationary and rotating rings or polish the magain4.Change spring
    Noise and vibration1.Improper assembling 2.The in concentricity of pump shaft and motor shaft 3.Absorption tube or filter stopped up 4.Absorption tube dimension is too small and long.It could not pump in,for resistance is too big 5.Oil exhaustion tube’s resistance is too big6.Air leakage 7.Fastener is relaxed 8.Gears and bearings stand sides show serious wear and tear or gripped1.Check out and maintain 2.adjust it 3.Clear dirt things in the absorption tube or filter 4.Read just it 5.Check up whether exhaustion tube or valve are stopped up6.Check up and maintain7.Check up and tighten it 8.Disassemble and maintain or change them
    Safely valve unworkable1.Wrong position2.Pressure too high 3.Safety valve chip gripped1.Reassembling it2.Lower the pressure 3.Disassembling,wash and adjust


























    Quality Electric Oil Transfer Pump 380v 220v 415v , CBN Series Heavy Oil Pump for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shenzhen Yuzhou Machinery Equipment Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)